 |
|
|
|
|
|
|
|
|
|
sitruc
50cc nipper
Joined: 15 Jan 2011
Posts: 30
|
 Posted: Sat Jul 23, 2011 8:35 pm Post subject: Yfz450 2004 parts wanted help |
  |
|
Edit.. got the frame and parts back from the powder coaters and now need these to put it all back together.
lower rear shocker link (pins worn but have bearing and seal kit)
l/h/r lower fender bracket
chain slider on front of swing arm
lower chain roller
rear sprocket bolts.
cheers
Hey Everyone,
picked up a 2004 yfz450 this week , stripping down ready for powder coating.
does anyone have any of the following- oem preferred
Steering stem (oem)
rear light
rear grab bar & fender brakets (lower)
located in albury/wodonga -- nsw 2641 - for ideas of postage
cheers Tim
Last edited by sitruc on Sat Sep 17, 2011 8:54 pm; edited 2 times in total |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Sun Jul 24, 2011 5:46 pm Post subject: |
|
|
yep got that left. 0401789860
_________________
Im not the sharpest tool in the shed |
|
| |
|
|
|
|
|
|
|
|
DR350
50cc nipper
Joined: 15 Jul 2010
Posts: 22
Location: Hervey Bay
|
| Posted: Mon Jul 25, 2011 2:52 pm Post subject: ATV bit's |
|
|
| Try Scot from ATV unlimited 0408 298 600. should get all you need there. |
|
| |
|
|
|
|
|
|
|
|
sitruc
50cc nipper
Joined: 15 Jan 2011
Posts: 30
|
| Posted: Sun Jul 31, 2011 10:51 am Post subject: |
|
|
updated first post
found a-arms (thanks quadguy)
pulled rear end apart and axle splines shot on l/h side
need oem axle and 1 hub (take as a pair if required) |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Sun Jul 31, 2011 11:36 am Post subject: |
|
|
got a 04/05 axle you can have for free,
or a new take off.
have hubs as well 04017898610
_________________
Im not the sharpest tool in the shed |
|
| |
|
|
|
|
|
|
|
|
sitruc
50cc nipper
Joined: 15 Jan 2011
Posts: 30
|
| Posted: Fri Aug 05, 2011 6:57 pm Post subject: |
|
|
thanks to 2 members
quadguy - got me some sweet a-arms - cheers for a great deal
and
quad - he sold me the rear axle & hubs ,steering stem ,rear light, grab bar, foot pegs and heal gaurd.. a big thanks and i cant recommend him enough as a good seller. probably will need more bits as i move along with this project |
|
| |
|
|
|
|
|
|
|
|
sitruc
50cc nipper
Joined: 15 Jan 2011
Posts: 30
|
| Posted: Tue Aug 16, 2011 9:44 pm Post subject: |
|
|
got all that on the first post , but was after a few more bits - if anyone can help.
*l/h/r lower fender mount
*rear sprocket bolts
*swingarm fr chain slider
*rear shock linkage pins (4 pins thru the bearings) purchased bearing kit 3 pins are too badly worn
cheers Tim |
|
| |
|
|
|
|
|
|
|
|
sitruc
50cc nipper
Joined: 15 Jan 2011
Posts: 30
|
| Posted: Sat Sep 17, 2011 8:55 pm Post subject: |
|
|
| bump to the top |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
