 |
|
|
|
|
|
|
|
|
|
richie_supercharged
Roostin Away
Joined: 12 Apr 2010
Posts: 555
Location: Newcastle
|
 Posted: Sat Dec 01, 2012 6:00 pm Post subject: My 84 250r lives |
  |
|
I haven't started my 84 250r for around 2 years I put the head back on with new head gasket and plug , started 4th kick in a cloud of smoke 
Only problem is it bogs down at high revs I thought it was a gasket problem but it is still doin it even with a new one
The cylinder has oil on it after 5 mins .. Head nuts may not be tight enough but I didn't want it to over tighten them ..may just pinch them on abit more
This is my backup for Australia Day cause I don't think my 82 will be finished 
_________________
If in Doubt.. Flat out
84 ATC 250r (290kit)
82 ATC 250r
77 ATC 90 |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
richie_supercharged
Roostin Away
Joined: 12 Apr 2010
Posts: 555
Location: Newcastle
|
| Posted: Sat Dec 01, 2012 7:27 pm Post subject: |
|
|
I think it's a jetting or dirty carb problem?
Was working fine then one day it didn't run right
Idles fine just at high revs starts bogging
I've got a vid I will post it up
_________________
If in Doubt.. Flat out
84 ATC 250r (290kit)
82 ATC 250r
77 ATC 90 |
|
| |
|
|
|
|
|
|
|
|
ForeverThreeWheels
The Day Starts With OZATV !
Joined: 18 Nov 2008
Posts: 1742
Location: Maitland
|
| Posted: Sun Dec 02, 2012 7:51 pm Post subject: |
|
|
Take the air filter lid off. May be getting too much fuel.
_________________
 |
|
| |
|
|
|
|
|
|
|
|
richie_supercharged
Roostin Away
Joined: 12 Apr 2010
Posts: 555
Location: Newcastle
|
| Posted: Sun Dec 02, 2012 8:36 pm Post subject: |
|
|
Never had an airbox
_________________
If in Doubt.. Flat out
84 ATC 250r (290kit)
82 ATC 250r
77 ATC 90 |
|
| |
|
|
|
|
|
|
|
|
HaggLE
Roostin Away
Joined: 16 Mar 2009
Posts: 511
Location: Newcastle
|
| Posted: Sun Dec 02, 2012 10:03 pm Post subject: |
|
|
Put the 82 top end on it...
If the 82 is ready for oz day swap it back.
Although could be the gearbox side crank seal??? |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
