 |
|
|
|
|
|
|
|
|
|
kyle
90cc 2 stroke / 110 4 stroke
Joined: 24 Aug 2008
Posts: 91
|
 Posted: Sat Nov 22, 2014 4:40 pm Post subject: Idle problems after rebuild |
  |
|
Hi all Just put a rebuild kit through, Thanks to the internet it was easy.
My problem is now it wont idle have to touch the throttle just a little to keep it there otherwise if i let go it stalls
I set the jet need to the middle, the air & stop screw are both 1 and 1/2 turns out. what else can be done to adjust this
Thanks
_________________
 |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
jakep53
90cc 2 stroke / 110 4 stroke
Joined: 27 Apr 2014
Posts: 68
Location: Victoria
|
| Posted: Sat Nov 22, 2014 6:14 pm Post subject: |
|
|
Where the throttle cable goes in to the thumb/twist just wind the cable out a tiny bit while it is running and that will increase the idle speed.
_________________
wanted 200x 250r and 350x any condition any price....I'm not looking for show ponies I just want a bike that needs a lot of work and is a decent price!! |
|
| |
|
|
|
|
|
|
|
|
Ozpilot
Blaster class
Joined: 02 May 2007
Posts: 101
|
| Posted: Sun Nov 23, 2014 4:31 pm Post subject: |
|
|
| Start it up and screw the stop screw in till it idles. That screw is what the slide sits on and that is how the idle is set. |
|
| |
|
|
|
|
|
|
|
|
kyle
90cc 2 stroke / 110 4 stroke
Joined: 24 Aug 2008
Posts: 91
|
| Posted: Tue Nov 25, 2014 8:30 pm Post subject: |
|
|
Thanks guys,, the idle screw has worked, now idling fine when warmed up
Cheers
_________________
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
