 |
|
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
 Posted: Wed Jan 30, 2008 9:07 am Post subject: Banshee parts - pipes crank RZ top end... |
  |
|
Hi fellas, im moving house so need to get rid of some of this stuff to make room at my new place!
Toomey T5 pipes and silencers: Bare metal system, excellent condition, no dents etc… $500 + postage
Standard Crank: not sure what year motor it is out of, but I have checked it with feeler gauges and verniers against the specs in the haines manual and its in top condition…. $200 + postage
Pro Design Billet filter flange and Pro Design Foam Filter: Excellent condition, barely used due to going to pod filters $100 + postage
FMF Fatty pipes (no silencers): these pipes are in excellent condition, chrome is excellent, no dents etc, can get new silencers if needed for extra $250… $600 + postage
RZ350 power valve top end and electrics: I have a couple of RZ top ends and don’t need em all! I removed this one from a complete running bike, pistons were stamped 64.5 when I pulled it apart. Parts included are barrels, head, powervalves, complete wiring harness, cdi and powervalve controller. Parts missing are stator and flywheel, pistons intakes carbs etc… $600 + postage
I will try and get pics up of everything this weekend, if it aint all gone by the end of next week its goin on ebay!
PM me for contact details.
Thanks, mark.
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
gammie61
Blaster class
Joined: 13 Aug 2007
Posts: 151
Location: Cairns QLD
|
| Posted: Thu Jan 31, 2008 6:22 pm Post subject: |
|
|
HEY mark. I've got Aprilla silencers on standard pipes. Would they work on a set of FMF pipes?
Peter
_________________
06 LTZ400
2000 BANSHEE
Lousy rider.
Eats lots mud now it's wet. |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Fri Feb 01, 2008 8:41 am Post subject: |
|
|
I am guessing they would gammie, but someone would have to confirm?
actually ive seen banshees getting around with standard expansion chambers and FMF mufflers, which leads me to believe they would fit.
i know that the SST mufflers wont fit, but they are different to the fatty pipes.
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
doorslammer
Roostin Away
Joined: 24 Jul 2007
Posts: 902
Location: Northern WA
|
| Posted: Fri Feb 01, 2008 9:35 am Post subject: |
|
|
if it dont fit, you just hack your mufflers off the where the chamber and the muffler meets than just use silicon hose with hose clamps, its crude but it works
_________________
01 Banshee
Never take life seriously. Nobody gets out alive anyway |
|
| |
|
|
|
|
|
|
|
|
AzzA350
90cc 2 stroke / 110 4 stroke
Joined: 08 Jan 2008
Posts: 52
Location: dunsborough, WA
|
| Posted: Wed Apr 16, 2008 6:15 pm Post subject: |
|
|
| how much do u rekon the toomey pipes would be to get to brisbane? |
|
| |
|
|
|
|
|
|
|
|
AzzA350
90cc 2 stroke / 110 4 stroke
Joined: 08 Jan 2008
Posts: 52
Location: dunsborough, WA
|
| Posted: Wed Apr 16, 2008 6:17 pm Post subject: |
|
|
| wait i think i already asked this a little while ago |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Wed Apr 16, 2008 7:53 pm Post subject: |
|
|
mate i reckon it would cost about $50 but id have to check
they just got bead blasted and look smick too
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
AzzA350
90cc 2 stroke / 110 4 stroke
Joined: 08 Jan 2008
Posts: 52
Location: dunsborough, WA
|
| Posted: Wed Apr 16, 2008 8:12 pm Post subject: |
|
|
| ill hav the money in like a week or 2 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
