 |
|
|
|
|
|
|
|
|
|
dowlo
50cc nipper
Joined: 01 May 2008
Posts: 13
Location: darwin
|
 Posted: Sat Jul 26, 2008 12:44 pm Post subject: parts and advice |
  |
|
Gday All!
First a bit about myself.Ilive in Darwin I got my first trike in 1992 a 83 250r.I still have it but it needs rebuilding I hope to get around to it oneday.I also have a 85 250r wich ive owned for 2 years.I am looking for parts and advice for the 85 250r.what I need is a triple clamp,1 inner fork tube,front brake hose and handle bars.I was also wondering if anybody can tell me if the earlier model parts are compatable or if 4 wheeler handle bars fit trikes.Any advice or help would be greatly appreciated.
Cheers Dowlo |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Aussieduner
Moderator
Joined: 05 Sep 2006
Posts: 1458
Location: New South Wales
|
| Posted: Sat Jul 26, 2008 5:19 pm Post subject: Re: parts and advice |
|
|
| dowlo wrote: | Gday All!
First a bit about myself.Ilive in Darwin I got my first trike in 1992 a 83 250r.I still have it but it needs rebuilding I hope to get around to it oneday.I also have a 85 250r wich ive owned for 2 years.I am looking for parts and advice for the 85 250r.what I need is a triple clamp,1 inner fork tube,front brake hose and handle bars.I was also wondering if anybody can tell me if the earlier model parts are compatable or if 4 wheeler handle bars fit trikes.Any advice or help would be greatly appreciated.
Cheers Dowlo |
G'Day Dowlo
Welcome to our trike forum.
Ok for the bits your are chasing...
* I just put some ProTaper bars on my '85 250r (ATV High Part# 02-5257) and they are as close as you will get to the stock bars(see pics below).
* A front brake line can be made easily with some braided line and 2 banjo fittings, this type of line works better than a stock line. (any car brake place will be able to make one up ).
* Triple Clamp...contact hustleratvracing (Dom) on this forum he has a set of triples and some forks that may suit your needs.
Anyway see how you go and if you run into trouble locating what you need up there im sure we can get those items shipped from NSW.
_________________
1989 TRX 250R |
|
| |
|
|
|
|
|
|
|
|
dowlo
50cc nipper
Joined: 01 May 2008
Posts: 13
Location: darwin
|
| Posted: Sun Jul 27, 2008 8:20 am Post subject: |
|
|
| Thanks aussieduner for your help |
|
| |
|
|
|
|
|
|
|
|
Aussieduner
Moderator
Joined: 05 Sep 2006
Posts: 1458
Location: New South Wales
|
| Posted: Sun Jul 27, 2008 10:12 am Post subject: |
|
|
| dowlo wrote: | | Thanks aussieduner for your help |
No worries.
If you would like you and your trike to be featured in Australian ATV Action just send me a picture to aussieduner@hotmail.com.au
Cheerz
_________________
1989 TRX 250R |
|
| |
|
|
|
|
|
|
|
|
stitch250R
4fiddy Racer
Joined: 30 Dec 2006
Posts: 260
|
| Posted: Sun Jul 27, 2008 2:37 pm Post subject: Re: parts and advice |
|
|
| dowlo wrote: | Gday All!
First a bit about myself.Ilive in Darwin I got my first trike in 1992 a 83 250r.I still have it but it needs rebuilding I hope to get around to it oneday.I also have a 85 250r wich ive owned for 2 years.I am looking for parts and advice for the 85 250r.what I need is a triple clamp,1 inner fork tube,front brake hose and handle bars.I was also wondering if anybody can tell me if the earlier model parts are compatable or if 4 wheeler handle bars fit trikes.Any advice or help would be greatly appreciated.
Cheers Dowlo |
hey mate,
i have some SPP fatbars ive taken off my 85'R incase your interested |
|
| |
|
|
|
|
|
|
|
|
dowlo
50cc nipper
Joined: 01 May 2008
Posts: 13
Location: darwin
|
| Posted: Mon Jul 28, 2008 7:13 pm Post subject: parts |
|
|
| How much $$ |
|
| |
|
|
|
|
|
|
|
|
stitch250R
4fiddy Racer
Joined: 30 Dec 2006
Posts: 260
|
| Posted: Mon Jul 28, 2008 9:38 pm Post subject: |
|
|
| check your PM inbox |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
