 |
|
|
|
|
|
|
|
|
|
atc250r
90cc 2 stroke / 110 4 stroke
Joined: 05 Dec 2007
Posts: 94
Location: Geraldton WA
|
 Posted: Mon Aug 18, 2008 8:10 pm Post subject: centrifugal clutch slipping on 1984 atc125m |
  |
|
g'day people
just got a atc125m the other week and the centrifugal clutch slips heaps,
just wondering if anyone else has had this problem and know the solution.
i do have a service manual for it but im just askin anyway.[/b] |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
mex087
50cc nipper
Joined: 12 Jan 2008
Posts: 48
Location: seaham
|
| Posted: Mon Aug 18, 2008 8:24 pm Post subject: |
|
|
| just replace the plates mate . the adjuster on the side of the clutch will have to be re adjusted ... either all the way in and quarter out or all the way out and quarter in but it will state that in your book . easy job just watch the ball bearings(3) and the spring . but little bit of grease will hold them in or lean it on its side. watch out for car oils also as they contain friction modifiers which wet clutches dont like ! hope this helps |
|
| |
|
|
|
|
|
|
|
|
atc250r
90cc 2 stroke / 110 4 stroke
Joined: 05 Dec 2007
Posts: 94
Location: Geraldton WA
|
| Posted: Tue Aug 19, 2008 7:27 pm Post subject: |
|
|
| now worries, ill check it out. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
