OZ ATV :: The Australian ATV Forum

[feralkid]

I think I am going to get rid of the 110 3 wheeler I got. I did want to have a muck around with it but I need a new set of rims and tyres for speedway on my 450 and need a bit more money.
I've had this 110 running with the carb off my chinese 110 quad on it so I'm going to throw the quad in as well if it is wanted for parts for the trike. I've just put a new piston ring and gasket set in the quad motor but when I tried to start it all of the wiring burnt out so it is probably only good for parts, from what I have seen I am pretty sure that the top end of the quad motor is the same as the trike, so the piston should be good to go into the trike.
The trike's seat cover is nearly all gone though, it needs a rear sprocket and the plastics have been repaired though after cracks.
I'll try and put some pics up of it tomorow.

The main problem is though I don't have a clue what these 2 would be worth together. Any ideas of what I should be asking?

Feralkid
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[HaggLE]

feralkid wrote:

from what I have seen I am pretty sure that the top end of the quad motor is the same as the trike, so the piston should be good to go into the trike. Feralkid

None of the chinese motors are the same as the honda 90/110 motors. you cant even bolt a china motor into a 90/110 easily (you can the other way though). Piston may fit but will need boring .5mm to fit, not a straight swap, head and barrel will not fit the honda motor.

Most china motors are interchangable with Honda 50/70 motors.

[feralkid]

Plastics and tank were just sat on for the pics because I have had them off, sorry about the quality of the pics too, used my sisters new camera and it is crap. If anyone wants more pics just let me know.
Forgot to mention in the other post about the tank being dinted really bad too from the front forks and and about it having really good kenda bear claws on it.






_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[ForeverThreeWheels]

Give it a really good degreasing and clean her right up. That alone will get you another couple hundred $$$.
If you can get it cleaned up and running nicely with the chinese carb i'd be asking around $750..

or if no-one here wants it... put it on ebay start it at $500 and have no reserve.

Its kinda hard to tell with it looking so rough but id defiantely tidy all that wiring up, buff the plastics and tank and degrease the engine first because the way it looks at the moment it would probably only bring you maybe $350.
_________________

[feralkid]

Ok sweet, so would the chinese carb be better than the stock one. The only reason that I used it was because i knew it worked and wasn't sure if the stock one did
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[ForeverThreeWheels]

feralkid wrote:

Ok sweet, so would the chinese carb be better than the stock one. The only reason that I used it was because i knew it worked and wasn't sure if the stock one did

Stock would be better. Try getting it going with the stock carby. If all else fails use the Chinese carb.
_________________

[feralkid]

Ok, I would say that the stock one will be fine, only used the other one because I knew it deffinantly worked.
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[feralkid]

I gave it a good clean up today and it came up pretty good, I'll stick some pics up tomorow. Got it running alright with the stock carby too, revs and idles but blows a fair bit of smoke, just needs new rings.

If no-one is interested in buying as a whole bike I will part it out if anyone wants anything too.
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[ForeverThreeWheels]

feralkid wrote:

I gave it a good clean up today and it came up pretty good, I'll stick some pics up tomorow. Got it running alright with the stock carby too, revs and idles but blows a fair bit of smoke, just needs new rings. If no-one is interested in buying as a whole bike I will part it out if anyone wants anything too.

I look forward to pics mate. Have you thought about selling your 450 quad and keeping the trike? Just a suggestion.
_________________

[feralkid]

Haha dunno how the little trike would go hanging out around the speedway track with the 450's though. I would like to keep it and do it up but don't have the time or money, can only really run the one expensive bike and my other farm bikes.

Got some pics and a bit of a dodgy video, didn't idle in the video but that is only because I had been mucking around with the idle screw. The light works too now that I have fixed the wiring, just joined up all the wires and wrapped everything in black electrical tape so it was covered, still pretty dodgy but a lot better than it was. The video shows how much smoke it blows though, must have no rings at all left in it. Also found yesterday after I washed it that the tyres still have the paint on them and are nearly brand new, they are probably worth more than the bike.
Heres the pics anyway.





_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[feralkid]

_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[feralkid]

Here is the video
http://www.youtube.com/watch?v=ZVuOj5ibU6Y
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[HaggLE]

Give it an oil change and it might slow up the smoke.

[feralkid]

Yeah I have given it a change before I did this video. Might give it another one and see how it goes.
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[Martin]

I'm after some parts if you decide to strip it.
_________________
The older you get, the more it hurts.....

[feralkid]

What would you be after, there's a few things on there probably not worth selling, all depends what you are after if no-one wants the whole thing.
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[HaggLE]

feralkid wrote:

Yeah I have given it a change before I did this video. Might give it another one and see how it goes.

didnt overfill it did you? that would make it smokey...
Could also be the exhaust with build up in it causing smoke...

[feralkid]

Nah it wasn't over filled, could be the exhaust, might give it a good run for a bit when I get back. Am going to be away for a few days so I'll do a bit more with it when I get back.
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[Martin]

Im after a complete rear end. Axle, bearing carrier and rear brakes.
_________________
The older you get, the more it hurts.....

[feralkid]

I've decided to part it out if anyone is looking for anything for their 110.
Also sent a PM to Martin.
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[ButcherBoy]

Why not chuck it on eBay before stripping it down? It's only gunna cost you another $10..If worse comes to worse you're going to strip it anyway give it a week on eBay see what happens
_________________
Yamaha '07 Raptor 700r SE
Honda 1989 TRX 250r
Honda 1985 "70" 125cc
Honda 2012 "70" 200x

[feralkid]

I've got enough people now that want stuff that I am better off just stripping it.
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[ButcherBoy]

ahh, cool
_________________
Yamaha '07 Raptor 700r SE
Honda 1989 TRX 250r
Honda 1985 "70" 125cc
Honda 2012 "70" 200x

[feralkid]

Rear end is gone and possibly a few other things but if anything else is needed let me know.
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"

[feralkid]

Rear end, break pedal, carby and cylinder are all gone.
_________________
"If in doubt go flat out"
"Nothing worth having is easy to get"