twinrock
90cc 2 stroke / 110 4 stroke
Joined: 03 Jul 2007
Posts: 76
 |
 Posted: Fri Aug 31, 2012 1:27 am Post subject: banshee top end |
  |
|
i have a banshee top end unfortunately the engine did a big end bearing and messed up one cylinder so it will need the next up size..
the good news is these cylinders are on stock bore and have done very little work as they were on a road bike.. was built about 3 months ago.
the cylinders are ported professionally by JMC racing they produce great power right through out the rev range i have had a few different set ups including rz350powervalve,4mil stroker and athena 68mm and this has been the best..comes head with freeflow billet reed cages and duel stage reads(boysen) and brand new carb manifolds and the other perfectly good piston all thats needed is a rebore and piston on one side .25 over
$800 ono
0406726252 thanks |
|
