twinrock
90cc 2 stroke / 110 4 stroke
Joined: 03 Jul 2007
Posts: 76
 |
 Posted: Wed Feb 27, 2013 11:43 pm Post subject: dt200L engine blaster up grade |
  |
|
i have a dt200L which im considering pulling off the road this is the early dt 200 that shares the exact same engine as the blaster but water cooled and power valve not to be confused with the later dt200 which is crank case inducted..
specs are
top end 2nd over size bore and piston in perfect condition
head has been squished
cylinder has had a full extensive clean up of all ports and tranfers, no port heights have been changed though..
has v-force 3 reeds and 32mm flat slide carb
brand new clutch plates and springs
the engine goes real hard.. i can comfortably sit at 110 all day and will do 150kpr
power pulls hard from very low...makes my mates standard dt feel very average
included will be loom if needed cdi and pv control
radiator
although the engine is good the rest of the bike is old and tired very rusty tank, the lighting stopped working the other day suspect lighting coil also have some trouble with power valve i think the motor is faulty,
im building a house and cant justify any more cash on such a bike
it is still regoed and a daily rider
$900 for the engine and bits i havce listed thanks
newcastle 0406726252 |
|
