 |
|
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
 Posted: Sun Feb 24, 2008 4:36 pm Post subject: need help |
  |
|
I need help trying to remove the snap ring thats on the lock nut on the rear axle anyone know how to remove it??,Just went riding and the bearings in the carrier collapsed and locked up and where would I get bearings for the carrier from???
thanks |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Aussieduner
Moderator
Joined: 05 Sep 2006
Posts: 1458
Location: New South Wales
|
| Posted: Sun Feb 24, 2008 8:00 pm Post subject: |
|
|
Keep undoing the axle locknut until the pressure comes off the sleeve that covers that snap ring then you should have access to remove it easily.
Take one of the old bearings to that bearing shop down from where your dad works(Munibung Rd) and they will match it plus the seals too, i picked up some from there last year.
_________________
1989 TRX 250R |
|
| |
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
| Posted: Mon Feb 25, 2008 5:50 am Post subject: |
|
|
I finally got the outta lock nut and the sleeve off,I had to cut it in half to get it off.  |
|
| |
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
| Posted: Mon Feb 25, 2008 5:30 pm Post subject: |
|
|
| got another problem,the disk carrier is seized on.any idea how i can get it off??? |
|
| |
|
|
|
|
|
|
|
|
Oldrodder
Roostin Away
Joined: 14 May 2007
Posts: 731
|
| Posted: Mon Feb 25, 2008 5:39 pm Post subject: Press |
|
|
Find someone with a press and carefully press it out, I have one if you can't find anyone closer to you.
Glen |
|
| |
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
| Posted: Mon Feb 25, 2008 6:42 pm Post subject: |
|
|
I just had to pull the swing arm out,
this is the hub i cant knock off the spline of the axle,glen would you be able to press this off???
and my poor trike pulled down
not a single crack in the swing arm 
thanks |
|
| |
|
|
|
|
|
|
|
|
stitch250R
4fiddy Racer
Joined: 30 Dec 2006
Posts: 260
|
| Posted: Mon Feb 25, 2008 6:55 pm Post subject: |
|
|
[quote="Jamie"]I just had to pull the swing arm out,
not a single crack in the swing arm
cause your only hitting the toddler size jumps |
|
| |
|
|
|
|
|
|
|
|
250Rtony
4fiddy Racer
Joined: 25 Apr 2007
Posts: 200
Location: wherever there is a 250r
|
| Posted: Tue Feb 26, 2008 6:17 am Post subject: |
|
|
i have got a spare hub if that one is stuffed.
tony
_________________
'86 250R ATC
'07 Pro Shark 90cc RED
'07 Pro shark 90cc BLUE
74 atc 70
84 ytm 200 |
|
| |
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
| Posted: Wed Feb 27, 2008 5:02 pm Post subject: |
|
|
i finally got the disk hub of and have now found that the bearing carrier is cracked  ...
anyone know where i would get a bearing carrier to suit a 85 250r?
thanks |
|
| |
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
| Posted: Fri Feb 29, 2008 5:44 pm Post subject: |
|
|
wel I've had no luck with a bearing carrier so dad went and saw pro-mac at cardiff and its now in there getting the crack welded up so I should have that back in 2 weeks hopefully,
and thanks to stitch Its got a new DG pipe on it
 |
|
| |
|
|
|
|
|
|
|
|
stubby
90cc 2 stroke / 110 4 stroke
Joined: 16 Aug 2007
Posts: 79
|
| Posted: Fri Feb 29, 2008 5:49 pm Post subject: pipe |
|
|
| nice pipe jamie will u be up & running for easter |
|
| |
|
|
|
|
|
|
|
|
BC250R
Joined: 23 Jan 2007
Posts: 375
Location: Stockton Dunes if i'm lucky
|
| Posted: Fri Feb 29, 2008 6:14 pm Post subject: |
|
|
Hey jamie,
what did you do with your old pipe? i cracked mine near the engine and thought that bit on yours may be ok for a cut n shut.
_________________
 
Technical info thread
http://www.ozatv.com/forum/viewtopic.php?t=4425 |
|
| |
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
| Posted: Fri Feb 29, 2008 6:49 pm Post subject: |
|
|
| BC250R wrote: | Hey jamie,
what did you do with your old pipe? i cracked mine near the engine and thought that bit on yours may be ok for a cut n shut. |
i still got it but it was crushed and never sat flush against the flange and cracked and welded near the flange aswel i dont know if it will be any good to you....
and steve i dont know if my bike will be back together for easter cause i cant get the carrier welded for about 2-3 weeks
if i dont get it done in time i might have to borrow the kwaka of dad for a day to go riding  |
|
| |
|
|
|
|
|
|
|
|
Youngrodder
50cc nipper
Joined: 27 Jan 2008
Posts: 21
Location: Newcastle
|
| Posted: Fri Feb 29, 2008 9:05 pm Post subject: |
|
|
looks like both of us are off the sand for a couple more weeks just yet mate...
were waiting on a machine shop to...
cant wait to take mine on the sand, with ya..
_________________
www.downundertruckin.com |
|
| |
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
| Posted: Sat Mar 01, 2008 9:46 am Post subject: |
|
|
| Just got the new bearings and seals from bearing dynamics at wickham cost me $10....cheap!!! |
|
| |
|
|
|
|
|
|
|
|
stubby
90cc 2 stroke / 110 4 stroke
Joined: 16 Aug 2007
Posts: 79
|
| Posted: Sat Mar 01, 2008 10:40 am Post subject: |
|
|
| get a move on jamie only clp weeks to the long weekend nick & hulk r going up there on tuesday if your about me still have my side strapped up from torn muscle so resting for the easter weekend give nick a pm if u can go mmet them on tuesday |
|
| |
|
|
|
|
|
|
|
|
ashnery
Moderator
Joined: 03 Jul 2006
Posts: 927
Location: www.dn.eng.com.au
|
| Posted: Sun Mar 02, 2008 5:31 pm Post subject: |
|
|
If you get stuck again let me no I have welded tons of carriers and removed many stubourn bolts and axles over the years.but dont tell anyone!!
_________________
OH "profanity removed" I SAID "profanity removed".......OH "profanity removed" I SAID "profanity removed" |
|
| |
|
|
|
|
|
|
|
|
stitch250R
4fiddy Racer
Joined: 30 Dec 2006
Posts: 260
|
| Posted: Sat Mar 08, 2008 11:07 am Post subject: |
|
|
| Jamie wrote: | | Just got the new bearings and seals from bearing dynamics at wickham cost me $10....cheap!!! |
anyone know if the front wheel bearings n seals can be matched locally also?? |
|
| |
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
| Posted: Sat Mar 08, 2008 4:14 pm Post subject: |
|
|
| hey anthony just take the wheel bearings n seals out of your bike then go over to southern engineering near in-ski near the rounda-bout at carro bridge or down further to bearing dynamics,they should be able to match them up... |
|
| |
|
|
|
|
|
|
|
|
Oldrodder
Roostin Away
Joined: 14 May 2007
Posts: 731
|
| Posted: Sat Mar 08, 2008 4:32 pm Post subject: Bearings |
|
|
Your seal size is (23 x 42 x 7) I can't find the actual bearing size but as Jamie said just go to bearing dynamics they are a great help.
Apart from that I think ATC heaven should be able to help you out. |
|
| |
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
| Posted: Sat Mar 08, 2008 5:15 pm Post subject: |
|
|
its back together again,thanks to 250rtony got a outta lock nut and collar of him and was able to put my bike back together to go for a few hrs riding,going riding again tomorrow arvo
 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
