Dieseldude
50cc nipper
Joined: 10 Mar 2012
Posts: 10
 |
 Posted: Sat Sep 12, 2015 1:37 pm Post subject: 350 bigbear trouble starting after rebuild |
  |
|
Hey guys.
I've got a few dramas with getting my 350 bigbear to start since it was stripped and put back together after fitting a new shift drum.
Assuming all wiring has been reconnected properly, I get no action when the button is pressed on the handle bars.
The key is on, but nothing happens - even with a brand new battery (12.7 volts).
When fitting the battery the first time, I put it in back to front and blew the fuse. I fitted a new fuse once the battery was turned around, but still no go.
Should the starter solenoid have power on the outlet side?
I'm at a loss, so any suggestions would be greatly appreciated.
Cheers
Anthony |
|
